g/c unchanged mach-xen/mach-default files.
40f5623akIoBsQ3KxSB2kufkbgONXQ linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/fixmap.h
4118b6a418gnL6AZsTdglC92YGqYTg linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/highmem.h
40f5623aJVXQwpJMOLE99XgvGsfQ8Q linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/io.h
-417d36c6TD52EqC__mHeIj9CHnuEjA linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/bios_ebda.h
40f5623am9BzluYFuV6EQfTd-so3dA linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/do_timer.h
-40f5623adZQ1IZGPxbDXONjyZGYuTA linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/io_ports.h
40f5623aKXkBBxgpLx2NcvkncQ1Yyw linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/irq_vectors.h
-40f5623aMQZoYuf4ml9v69N3gu8ing linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/mach_mpspec.h
-40f5623a8LroVMnZ5YRzJJmIc-zHlw linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/mach_reboot.h
-40f5623ayR1vnzfF__htza35a8Ft-g linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/mach_time.h
-40f5623a4YdRdVzYWJzOOoqe8mnrXA linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/mach_timer.h
-40f5623aDLxmbOtUHvkWztKjAO4EjA linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/mach_traps.h
-41062ab7HMSSuaUv3_Z4agLpjSO88A linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/pci-functions.h
40f5623aDMCsWOFO0jktZ4e8sjwvEg linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/setup_arch_post.h
40f5623arsFXkGdPvIqvFi3yFXGR0Q linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mach-xen/setup_arch_pre.h
4120f807GCO0uqsLqdZj9csxR1Wthw linux-2.6.9-xen-sparse/include/asm-xen/asm-i386/mmu_context.h
#../../i386/$(mcore-y)/
#obj- += ../../i386/pci/ ../../i386/oprofile/ ../../i386/power/
-xenflags-y += -Iinclude/asm-xen/asm-i386/mach-xen
+xenflags-y += -Iinclude/asm-xen/asm-i386/mach-xen \
+ -Iinclude/asm-i386/mach-default
CFLAGS += $(xenflags-y)
AFLAGS += $(xenflags-y)
+++ /dev/null
-#ifndef _MACH_BIOS_EBDA_H
-#define _MACH_BIOS_EBDA_H
-
-/*
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E.
- */
-static inline unsigned int get_bios_ebda(void)
-{
- unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
- address <<= 4;
- return address; /* 0 means none */
-}
-
-#endif /* _MACH_BIOS_EBDA_H */
+++ /dev/null
-/*
- * arch/i386/mach-generic/io_ports.h
- *
- * Machine specific IO port address definition for generic.
- * Written by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_IO_PORTS_H
-#define _MACH_IO_PORTS_H
-
-/* i8253A PIT registers */
-#define PIT_MODE 0x43
-#define PIT_CH0 0x40
-#define PIT_CH2 0x42
-
-/* i8259A PIC registers */
-#define PIC_MASTER_CMD 0x20
-#define PIC_MASTER_IMR 0x21
-#define PIC_MASTER_ISR PIC_MASTER_CMD
-#define PIC_MASTER_POLL PIC_MASTER_ISR
-#define PIC_MASTER_OCW3 PIC_MASTER_ISR
-#define PIC_SLAVE_CMD 0xa0
-#define PIC_SLAVE_IMR 0xa1
-
-/* i8259A PIC related value */
-#define PIC_CASCADE_IR 2
-#define MASTER_ICW4_DEFAULT 0x01
-#define SLAVE_ICW4_DEFAULT 0x01
-#define PIC_ICW4_AEOI 2
-
-#endif /* !_MACH_IO_PORTS_H */
+++ /dev/null
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
-
-#define MAX_IRQ_SOURCES 256
-
-#define MAX_MP_BUSSES 32
-
-#endif /* __ASM_MACH_MPSPEC_H */
+++ /dev/null
-/*
- * arch/i386/mach-generic/mach_reboot.h
- *
- * Machine specific reboot functions for generic.
- * Split out from reboot.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_REBOOT_H
-#define _MACH_REBOOT_H
-
-static inline void kb_wait(void)
-{
- int i;
-
- for (i = 0; i < 0x10000; i++)
- if ((inb_p(0x64) & 0x02) == 0)
- break;
-}
-
-static inline void mach_reboot(void)
-{
- int i;
- for (i = 0; i < 100; i++) {
- kb_wait();
- udelay(50);
- outb(0xfe, 0x64); /* pulse reset low */
- udelay(50);
- }
-}
-
-#endif /* !_MACH_REBOOT_H */
+++ /dev/null
-/*
- * include/asm-i386/mach-default/mach_time.h
- *
- * Machine specific set RTC function for generic.
- * Split out from time.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_TIME_H
-#define _MACH_TIME_H
-
-#include <linux/mc146818rtc.h>
-
-/* for check timing call set_rtc_mmss() 500ms */
-/* used in arch/i386/time.c::do_timer_interrupt() */
-#define USEC_AFTER 500000
-#define USEC_BEFORE 500000
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
-static inline int mach_set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char save_control, save_freq_select;
-
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- }
- CMOS_WRITE(real_seconds,RTC_SECONDS);
- CMOS_WRITE(real_minutes,RTC_MINUTES);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
- return retval;
-}
-
-static inline unsigned long mach_get_cmos_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
- int i;
-
- /* The Linux interpretation of the CMOS clock register contents:
- * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
- * RTC registers show the second which has precisely just started.
- * Let's hope other operating systems interpret the RTC the same way.
- */
- /* read RTC exactly on falling edge of update flag */
- for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
- break;
- for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
- if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
- break;
- do { /* Isn't this overkill ? UIP above should guarantee consistency */
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- }
- if ((year += 1900) < 1970)
- year += 100;
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-#endif /* !_MACH_TIME_H */
+++ /dev/null
-/*
- * include/asm-i386/mach-default/mach_timer.h
- *
- * Machine specific calibrate_tsc() for generic.
- * Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-/* ------ Calibrate the TSC -------
- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
- * Too much 64-bit arithmetic here to do this cleanly in C, and for
- * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
- * output busy loop as low as possible. We avoid reading the CTC registers
- * directly because of the awkward 8-bit access mechanism of the 82C54
- * device.
- */
-#ifndef _MACH_TIMER_H
-#define _MACH_TIMER_H
-
-#define CALIBRATE_LATCH (5 * LATCH)
-
-static inline void mach_prepare_counter(void)
-{
- /* Set the Gate high, disable speaker */
- outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
- /*
- * Now let's take care of CTC channel 2
- *
- * Set the Gate high, program CTC channel 2 for mode 0,
- * (interrupt on terminal count mode), binary count,
- * load 5 * LATCH count, (LSB and MSB) to begin countdown.
- *
- * Some devices need a delay here.
- */
- outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
- outb_p(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */
- outb_p(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */
-}
-
-static inline void mach_countup(unsigned long *count_p)
-{
- unsigned long count = 0;
- do {
- count++;
- } while ((inb_p(0x61) & 0x20) == 0);
- *count_p = count;
-}
-
-#endif /* !_MACH_TIMER_H */
+++ /dev/null
-/*
- * include/asm-i386/mach-default/mach_traps.h
- *
- * Machine specific NMI handling for generic.
- * Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_TRAPS_H
-#define _MACH_TRAPS_H
-
-static inline void clear_mem_error(unsigned char reason)
-{
- reason = (reason & 0xf) | 4;
- outb(reason, 0x61);
-}
-
-static inline unsigned char get_nmi_reason(void)
-{
- return inb(0x61);
-}
-
-static inline void reassert_nmi(void)
-{
- outb(0x8f, 0x70);
- inb(0x71); /* dummy */
- outb(0x0f, 0x70);
- inb(0x71); /* dummy */
-}
-
-#endif /* !_MACH_TRAPS_H */
+++ /dev/null
-/*
- * PCI BIOS function numbering for conventional PCI BIOS
- * systems
- */
-
-#define PCIBIOS_PCI_FUNCTION_ID 0xb1XX
-#define PCIBIOS_PCI_BIOS_PRESENT 0xb101
-#define PCIBIOS_FIND_PCI_DEVICE 0xb102
-#define PCIBIOS_FIND_PCI_CLASS_CODE 0xb103
-#define PCIBIOS_GENERATE_SPECIAL_CYCLE 0xb106
-#define PCIBIOS_READ_CONFIG_BYTE 0xb108
-#define PCIBIOS_READ_CONFIG_WORD 0xb109
-#define PCIBIOS_READ_CONFIG_DWORD 0xb10a
-#define PCIBIOS_WRITE_CONFIG_BYTE 0xb10b
-#define PCIBIOS_WRITE_CONFIG_WORD 0xb10c
-#define PCIBIOS_WRITE_CONFIG_DWORD 0xb10d
-#define PCIBIOS_GET_ROUTING_OPTIONS 0xb10e
-#define PCIBIOS_SET_PCI_HW_INT 0xb10f
-
projects / xen.git / commitdiff